1111 Pneumatic Cylinder
TYPE A Double-Acting
Linear Ball Slide

Cylinder bore diameter 10/16/20/25/32/40 mm
Ball bearings, that run on linear hardened and ground steel tracks, are retained in a linear cage This makes it possible to stress the unit in all three axes. This model is being phased out, but is still available as replacement.

1211 Pneumatic Cylinder
TYPE B Double-Acting
Linear Ball Slide

Cylinder bore diameter 8/10/16/20/25/32/40 mm
Similar to Type A, Type B is built with hardened and ground steel guide rails that permit greater loads. It is also available with dust-proof protection.

1221 Pneumatic Cylinder
TYPE B Twin Double-Acting
Linear Ball Slide

Cylinder bore diameter 20/25/32/40 mm
This type B Ball guide/slide/actuator includes 2 air cylinders, both double acting. The double cylinders produce double force and greater load capacity in this low profile configuration. A dust-proof version is also available.

1231 Pneumatic Cylinder
TYPE B D2R Double-Acting
Linear Ball Slide

Cylinder bore diameter 50/63/ 80 mm
This type B Ball guide/slide/actuator includes 2 air cylinders, both double acting. The double cylinders produce double force and greater load capacity in this low profile configuration. A dust-proof version is also available.

1241 Pneumatic Cylinder
TYPE B Flat Double-Acting
Linear Ball Slide

Cylinder bore diameter 8 mm
This type of cylinder stands out by its small construction height. To detect the piston position, one or more limit switches can be clamped in the provided sensor grooves.

1251 Pneumatic Cylinder
TYPE B Twin Double-Acting
Linear Ball Slide

Pneumatic cylinder
Type B, Twin double-acting Linear Ball
Slide (Single & Double Acting)Cylinder bore diameter 8 mm (twin piston)
The advantage of this pneumatic cylinder is its small design height and its powerful double piston drive.

1261 Pneumatic Cylinder
TYPE B Twin Double-Acting
Linear Roller Guide

Cylinder bore diameter 32mm, (Hub 50 mm, twin piston)
This heavy-duty cylinder is especially suited for extreme loads because it has linear rollers rather than balls, plus a double piston drive.

1271 Pneumatic Cylinder
TYPE B EW Single-Acting
Linear Ball Slide

Cylinder bore diameter 10/16/20/32/40 mm
This spring loaded type B cylinder has a single air supply for the forward stroke located at the front or the side of the mounting plate. The return stroke is driven by the spring.

1311 Pneumatic Cylinder
TYPE C Double-Acting
Linear Ball Slide

Cylinder bore diameter 10/16/20/25/32/40 mm
The guides On type "C" are made of hardened and ground steel rods. The balls run in continuous ways integrated in the base body. This allows the slide to be stopped at any position in either direction without jamming. These ball slides are equipped with integrated sensor grooves for electrical/electronic limit switches. The cylinders can be supplied with end position cushioning with external and adjustable limit stops or small hydraulic shock-absorbers (see accessories).

1321 Pneumatic Cylinder
TYPE C Double-Acting
Linear Ball Slide with Clamping Cartridge
(locking clamp)

Cylinder bore diameters 40 mm
The clamping cartridge offers secure holding and releasing of the carriage in any required position. The guides are made of hardened and ground steel rods. The balls run in continuous ways integrated in the base body. These pneumatic cylinders are equipped with integrated sensor grooves for electrical/electronic limit switches. The cylinders can be supplied with end position cushioning with external and adjustable limit stops or small hydraulic shock-absorbers (see accessories).

1411 Pneumatic Cylinder
TYPE K Double-Acting Compact

Cylinder bore diameters 10/16/20/25/32/40 mm
Type K is a pneumatic cylinder with a compact recto linear design. The two air connections are located on the front face.